| |
Label / Tag |
| |
iP-X Read-Only UHF RFID Tag: 110mm x 10mm Bare inlet with optional adhesive strip IP7010
|
| |
The iP-X read-only UHF RFID Tag can be used in many applications where medium range, multi-read, high-speed item identification is required including Supply Chain Management (item , case , container, crate), Transport Management (ENP / licensing, vehicles), Textiles (Smart Labeling and Smart-EAS - Electronic Article Surveillance), Asset Management (Non-metallic Office Furniture , equipment), Document / Baggage Management (postal, certificates , files , courier, inventory, air line baggage), Plastic Container Management (chemicals, hazardous waste) and Carton Packaging.
The tag has an iP-X2 / EM4222 chipset and consists of a chip attached to a printed antenna substrate (optional adhesive strip and chip glob-top). The antenna is tuned for optimum operation in air or affixed to low dielectric materials and can be tuned for other surfaces (e.g. specific polymers) upon customer request. The supplier’s logo can be printed on the substrate.
|
|
 |
|
| |
Features |
Benefits |
Single Chip Solution |
Cost Savings |
Fast moving tags can be read |
Ease of use |
High tag read rate – Up to 200 tags/ second |
Speed |
Robust anti-collision protocol |
High Speed with up to 240 simultaneous tag reads |
Compatible with USA, AUS, RSA and European spectrum regulations
|
Flexibility |
|
| |
..................................................................................................................................................................................................................... |
| |
iP-X Read-Only UHF RFID Tag Industrial Vehicle Type IP7019
|
| |
This tag can be used in applications where long range, multi-read, high-speed item identification is required such as Transport Management (ENP / licensing, rolling stock, vehicles, trailers), Supply Chain Management (item, pallet, container, crate), Marine applications – IP65, Access control and asset control and Industrial (machines, process control).
The tag has an iP-X2 / EM4222 chipset and connsists of a chip attached to a printed antenna above a conducting ground plane, which renders the tag independent of the surface to which it is attached. The housing is made of UV resistant ABS with profiled inserts for covering screw recesses.
|
|
 |
|
| |
Features |
Benefits |
Single Chip Solution |
Cost Savings |
Fast moving tags can be read |
Ease of use |
High tag read rate – Up to 200 tags/ second |
Speed |
Robust anti-collision protocol |
High Speed with up to 240 simultaneous tag reads |
Compatible with USA, AUS, RSA and European spectrum regulations
|
Flexibility |
|
| |
..................................................................................................................................................................................................................... |
| |
Read/Write ENP Tag |
| |
The tag is the same as the Read-Only ENP Tag but with the write capability. Pages can be locked after writing.
Range: 2-7 m depending on reader power output and configuration 4 m write range
Size: 170 x 10 x 0.1 mm with adhesive strip; custom size can be developed on request
|
|
 |
|
| |
..................................................................................................................................................................................................................... |
| |
iP-X2 Read-Only UHF RFID Tags Thick Credit Card Type IP7020 |
| |
This tag can be used for applications where long range, multi-read, high-speed item identification is required such as Supply Chain Management (item , case , container, crate), Transport Management (ENP / licensing, vehicles, trailers, tyres), Textiles (Smart Labeling and Smart-EAS - Electronic Article Surveillance), Assets Management (Office Furniture , equipment), Document / Baggage Management (postal, certificates , files , courier, inventory, air line baggage), Plastic Container Management (chemicals, hazardous waste) and Carton Packaging.
The tag has an iP-X2 / EM4222 chipset and the Smartlabel inlet consists of a chip on a flexible printed antenna substrate (with an optional adhesive strip). It is available in 50mm x 20mm and 110mm x 10mm standard enclosures. Custom form factors can be developed upon customer requests.
|
|
 |
|
| |
Features |
Benefits |
Single Chip Solution |
Cost Savings |
Fast moving tags can be read |
Ease of use |
High tag read rate – Up to 200 tags/ second |
Speed |
Robust anti-collision protocol |
High Speed with up to 240 simultaneous tag reads |
Compatible with USA, AUS, RSA and European spectrum regulations
|
Flexibility |
|
| |
..................................................................................................................................................................................................................... |
| |
| Shroud Type
(gas and other containers) |
| |
Shroud Type (gas and other containers)
The chip and wire dipole antenna are embedded in a HDPE Shroud geometry cover. This robust and durable design is intrinsically safe and versatile for various shroud radii. Tag can be customized. Used where medium range, multi-read, high-speed item identification is required: metal cylinder management (gas, beer, chemicals, hazardous waste).
Range: 2-20 m depending on reader power output and configuration
Size: 175 mm outside diameter x 29 H x 47 W mm cross-section |
|
 |
|
| |
..................................................................................................................................................................................................................... |
| |
RFID Cargo Tag |
| |
Rely on all-weather RFID tags for demanding cargo and asset tracking applications.
You need an RFID tag that will endure exposure to the elements (and more) if you plan on using it outdoors — especially for demanding cargo and asset tracking applications.
Get the durability designed to withstand 24-hour-a-day exposure to nearly any environmental condition with an all-weather RFID Cargo Tag from Symbol. And with our patented tag technology, you also get accurate, fast and reliable read performance for your enterprise applications.
Features and benefits of the RFID Cargo Tag:
- Rugged design tolerates natural and incandescent light, vibration, shock, rain, dust, oil and chemicals
- Flexible mounting options enable attachment to nearly any flat surface — including metal, plastic and wood
- Read range of up to 40 ft./12.19m
- Compatible with any Gen 2 EPC™ RFID system
- 96-bit memory with 16-bit control, for lock and kill features, increases security of onboard data
- Battery-free, maintenance-free passive technology for reduced cost of ownership.
|
|
 |
|
| |
Features |
Benefits |
Patented inlay-integrated circuit technology; integral 4 in. x 4 in. antenna; tuned to leverage the integrated aluminum backplate for increased performance |
Longer read ranges and more accurate read rates — up to 40 ft./12.19m and up to 400 tags per second |
Tested for shock, rain, dust, light immunity, oil and chemical resistance, solar tolerance, humidity and extreme temperatures |
Rugged design endures the rigors of most outdoor environments |
Gen 2 Class 1 EPC™ compliant tag |
Standards compliance ensures compatibility with any Gen 2 RFID system |
Mounts via adhesive or off-the-shelf 1/8 in. bolts or screws to metal, plastic, wood or any other flat surface |
Provides the flexibility to attach to nearly any flat surface |
Passive RFID technology |
Reduced cost of ownership — unlike active tags which require batteries, ‘battery-free’ passive tags are virtually maintenance-free throughout the life of the tag |
96-bit memory with 16-bit control for lock and kill features |
Enables secure storage of the data you need to maximize the benefit of your RFID application |
|
| |
..................................................................................................................................................................................................................... |
|
|
